The all weather paving joint compound

The quick and easy solution to filling joints between paving slabs and setts, suitable for natural stone and concrete paving. Simple to use, ProJoint™ Fusion™ allows an untrained hand to consistently deliver perfect joints every time – whatever the weather!

It delivers a weed free, frost resistant joint, without staining the paving – saving you time and money. ProJoint™ Fusion™ is supplied in two vacuum-packed pouches within the tub.

ProJoint™ Fusion™ is available in four colours: neutral (buff), mid grey, basalt and black.

KEY FACTS:

• Contractor-sized 15kg tubs – product supplied in two 7.5kg bags for easy handling and to minimise waste
• Suitable for use in wet weather
• Professional strength and suitable for joint widths of 3mm upwards
• Cement free and non-hazardous
• Suitable for pedestrian traffic: ideal for paths and patios
• Pre-mixed, ready to use and ideal for DIY use
• Suitable for natural stone and concrete paving, setts and slabs

£33.48 +VAT per tub

The Brush-In Porcelain Paving Grout

The quick and easy solution to filling joints between porcelain paving. Simple to use, ProJoint™ RapidFlow™ allows an untrained hand to consistently deliver perfect joints every time – precisely formulated for porcelain paving but equally suitable for natural stone paving.

It delivers a weed free, frost resistant joint, without staining the paving – saving you time and money. ProJoint™ Fusion™ is supplied in two vacuum-packed pouches within the tub.

ProJoint™ RapidFlow™ is available in five colours: neutral (buff), light grey, mid grey, basalt and black.

KEY FACTS:

• Contractor-sized 12.5kg tubs – product supplied in two bags for easy handling and to minimise waste
• Precisely formulated for Porcelain Paving
• Professional strength and suitable for joint widths of 3mm upwards
• Cement free and non-hazardous
• Suitable for pedestrian traffic: ideal for paths and patios
• Pre-mixed, ready to use and ideal for DIY use
• Also suitable for natural stone paving.

£35.42 +VAT per tub

A two-part epoxy resin mortar system suitable for vehicle areas up to 7.5 tonnes

A specialist solution to filling joints between paving slabs and setts, suitable for natural stone and concrete paving on pedestrian and vehicular areas with medium to heavy vehicle loads up to 7.5 tonnes.

The two-part epoxy resin system is easily mixed and quickly applied as a slurry to dampened paving. Its high performance means that it is used widely for domestic and commercial projects where medium traffic loading is required.

KEY FACTS:

• Permeable bedding mix not required
• Two part resin based mortar system, cement free
• Medium to heavy traffic loads up to 7.5 tonnes, ideal for patios, driveways and high traffic areas
• Self compacting, fast and easy application – without bending or kneeling
• Professional strength suitable for joint widths of 5mm upwards
• Weed, pressure washer and frost resistant
• Suitable for natural stone and concrete paving, setts and slabs.

All colours £69.44 +VAT per 27kg kit